| Repeater ID | 251 |
|
| Trustee |
| The trustee callsign (normally, but not necessarily, what the repeater identifies itself as) |
| Operator |
| What the repeater identifies itself as |
| Output Frequency |
| In Mhz |
| Club |
| Club callsign |
| Description |
| Text |
| Longitude |
| In decimals (not deg/min/sec). Leave both Long and Lat blank
to have it calculate location from city and state. |
| Latitude |
| In decimals (not deg/min/sec) |
| City |
| or cities |
| State |
| Two letter code |
| ZIP |
| |
| Range |
| Radius in miles, usually 20-50. |
| Offset |
| + or - |
| Offset Frequency |
| In Mhz e.g, -.6 or .6 for 2m |
| PL or CTCSS Tone |
| In hertz, e.g. 88.5 |
| Digital Squelch Code |
| |
| Notes |
| Free form |
| Tags |
| Tags separated by spaces.
Be sure to put the following into the tags for searching: trustee call,
club call, the band (2m, 70cm, 1.25m, etc) and any other tags you want
to group or search by (for instance, "k5ehx-link").
|
| Repeater Type |
| D=Down, R=Remote Receiver, H=QTH, P=Public Service |
| Country |
| USA, etc. |
| RX Ant Height (feet) |
| Receive antenna heigh in feet above ground level DO NOT ENTER HEIGHT ABOVE SEA LEVEL (i.e., tower height) - enter this and verify the
location to trigger coverage map generation |
| RX Ant Gain |
| Receive antenna gain in dB |
| TX Ant Height |
| Transmit antenna height in feet. Enter this, TX Gain and TX Power for Longley-Rice analysis DO NOT ENTER HEIGHT ABOVE SEA LEVEL (in-progress, testing). |
| TX Ant Gain |
| Transmit antenna gain in dB |
| TX Power |
| Transmit power in Watts |